Quick Start Guide (En); Installing A Hard Disk - Zotac ZBOX C NANO Serie Schnellanleitung

QUICK START GUIDE
PAC K AG E C O N T E N T S
• 1 x ZOTAC ZBOX nano
• 1 x ZOTAC VESA mount
• 1 x AC adapter
• 1 x Power cord
• 1 x WiFi antenna
• 1 x Quick Start Guide
• 1 x OS Recovery USB Drive (optional)
C U S TO M I Z I N G YO U R ZOTAC Z B OX N A N O
1. Loosen and remove the 4 thumb screws securing the
bottom cover.
2. Gently remove the cover.
I N S TA L L I N G M . 2 S S D M O D U L E
1. Locate the M.2 SSD slot and remove the screw.
2. Insert an M.2 SSD module into the slot at a 45 degree
angle.
3. Gently press down on the M.2 SSD module and install
the screw to secure the drive.

INSTALLING A HARD DISK

1. Locate the hard disk bracket, remove the screw, and
remove the hard disk bracket.
2. Install the hard disk bracket to a 2.5-inch SATA hard
disk /SSD with 2 screws.
3. Insert the hard disk /SSD into the socket and gently
slide into the connector.
4. Reinstall the screws of the hard disk bracket.
2
1
1 2
1 2
3 4
2
3