Desoutter PT250-T4000-S19S Bedienungsanleitung Seite 50

Part no 2050505663
Issue no 1
Series no C
Date 2006-10
Page 50/51
Testing/measuring
Static measurement / Dynamic measurement
Joint Simulator for Static Transducer
Part Number Model
615 910 927 0 ACS5.01
615 910 928 0 ACS6.05
615 910 929 0 ACS6.10
615 910 930 0 ACS8.05
615 910 931 0 ACS8.10
615 910 932 0 ACS10.10
615 910 933 0 ACS10.50
615 910 934 0 ACS10.50
615 910 935 0 ACS10.50
Stationary Transducer
Part Number Model
615 165 141 0 ST4001
615 165 142 0 ST4005
615 165 143 0 ST4010
615 165 144 0 ST4050
In Static as well as Dynamic measurement, it is advised to double check by the use of a
Dial Indicating Torque Wrench* (direct reading) or a Torsion Static Torque Wrench**
(connected to the Delta 4000 or Sigma 2001).
For further information regarding our complete measurement range, see our general
catalogue.
Torque Transducer
Part Number Model
615 165 211 0 DRT 4 H 20
615 165 212 0 DRT 4 Sq 20
615 165 213 0 DRT 4 Sq 25
615 165 214 0 DRT 4 Sq 75
615 165 215 0 DRT 4 Sq 180
615 165 216 0 DRT 4 Sq 500
Transducer Thread
ST4001 M5
ST4005 M6
ST4010 M6
ST4005 M8
ST4010 M8
ST4010 M10
ST4050 M10
ST4050 M12
ST4050 M16
Torque Torque
Range Nm Range ft.lb
1-15 0,7-11,1
5-70 3,7-51,6
10-150 7,4-110,5
50-700 36,8-516
Torque Torque
Range Nm Range ft.lb
1,5-20 1,11-14,7
1,5-20 1,11-14,7
1,8-25 1,33-18,4
5,0-75 3,69-55,3
12,0-180 8,85-132
35,0-500 25,8-368