Parkside PLS 48 C1 Originalbetriebsanleitung Seite 9

■ After work, allow the soldering iron to cool down in the air only.
GB
Do not attempt to quench it with water.
■ CAUTION! RISK OF FIRE! Use only the special multi-functional
holder or another fireproof surface when putting down the
soldering iron.
■ During breaks in work, the soldering iron must be placed in the
multi-functional holder.
■ Keep the appliance away from flammable material.
■ Never leave a switched-on appliance unsupervised.
■ CAUTION! RISK OF INJURY! Keep your hands away from the
heated workpiece. The heat can be emitted through the work-
piece.
■ Avoid contact between the hot soldering tip and the plastic parts
of the multi-functional holder. Otherwise, the appliance might be
damaged.
■ In case of danger, remove the plug from the socket immediately.
■ CAUTION! RISK OF POISONING! Avoid inhaling vapours!
■ During work over an extended period in which hazardous
vapours can be created, always ensure sufficient ventilation of the
workplace. In addition, protective gloves, a face mask and work
apron are recommended.
■ Avoid eating, drinking and smoking in rooms where soldering
work is taking place.
Otherwise, lead residues on your hands might contaminate the
food or cigarettes and be absorbed into your body.
■ Always wash your hands thoroughly after soldering.
■ Do not dispose of solder waste in normal domestic waste! Solder
waste should be disposed of with hazardous waste.
6
PLS 48 C1