Location Of The Terminals - Fagor SRP-08 M Bedienungsanleitung

3.4.1. LOCATION OF THE TERMINALS

Remove the plastic cover located on the upper left part of the front of the machine by levering the
upper part with a flat screwdriver (fig.3). If the plastic control holder of the machine is on the lower part,
use a No 3 Allen key to loosen the two screws (M-5x10) on the upper part in order to release the
skinplate cover (fig. 4). The terminals are found on the inside with the necessary bridges to personalise
the voltage connection of the machine in accordance with the instructions shown in the diagram (we
supply 3 bridges + 3 bridge-cables which are located inside the drum in a plastic bag). Once the
terminals have been prepared, replace the plastic cover.
41