Preparation For Installation - Agilent Technologies TPS-compact X3580-64000 Bedienungshandbuch

Preparation for Installation

The TPS-compact is supplied in a special protective packing. If this
shows signs of damage which may have occurred during transport,
contact your local sales office. When unpacking the system, be sure
not to drop it and avoid any kind of sudden impact or shock
vibration to it.
Do not dispose of the packing materials in an unauthorized manner.
The material is 100 % recyclable and complies with EEC Directive
85/399.
In order to prevent outgassing problems, do not use bare hands to handle
CAUTION!
components which will be exposed to vacuum. Always use gloves or other
appropriate protection.
Normal exposure to the environment cannot damage the TPS-compact.
NOTE
Nevertheless, it is advisable to keep it closed until it is installed in the system,
thus preventing any form of pollution by dust.
TPS-compact User Manual / 87-901-010-01 (H)
Instructions for Use

Preparation for Installation

16
245/314