Climate Control - ResMed ClimateLineAir Bedienungsanleitung

• If you use the ClimateLineAir Oxy without supplemental
oxygen, make sure the cap of the oxygen connector is
firmly attached.

Climate Control

Climate Control is an intelligent system that controls the
humidifier and the ClimateLineAir heated air tubing to deliver
constant, comfortable temperature and humidity levels during
therapy.
Designed to prevent dryness of the nose and mouth, it
maintains the set temperature and relative humidity while you
sleep. Climate Control can be set to either Auto or Manual
and is only available when both the ClimateLineAir and the
HumidAir humidifier are attached.
Climate Control Auto
Climate Control Auto is the recommended and default setting.
Climate Control Auto is designed to make therapy as easy as
possible, so there is no need to change the temperature or
humidity settings.
The Tube Temperature is set to Auto (80°F [27°C]) and
Climate Control adjusts the humidifier output to maintain a
constant, comfortable humidity level of 85% relative humidity
while protecting against rainout (water droplets in the air
tubing and mask).
Tube Temperature
In Climate Control Auto there is no need to change any
settings, but if the air in the mask feels too warm or cold you
can adjust the tube temperature to find what is most
comfortable for you. You can set the Tube Temperature to
anywhere between 60–86°F (16–30°C), or turn it off
completely.
To adjust the Tube Temperature:
1. In My Options, turn the dial to highlight Tube
Temperature and then press the dial.
2. Turn the dial to adjust the temperature and press the dial
to save the change.
English 3