LaCimbali M100 Gebrauch Und Installation Seite 53

CHANGING THE WATER IN THE BOILER - Procedure to carry out at least once a day
1
Press the key SET
FILTER-HOLDERS - This operation must be made on all the filter-holders at the end of each working day
1
Put a liter of cold water in a
suitable container and add
detergent.
4
Remove any residue with a sponge and rinse well with cold water.
2
.
Press the key
2
Remove the filters from the filter-holders.
.
5
A
Place the filters back in the filter holder, making sure that the
anchoring spring (A) of the filter is in its slot.
19 EN
3
WATER CHANGE
The following message will be displayed:
"WATER CHANGE". The water from the
boiler will drain from the hot water nozzle
(60 - 70% ca. of the total capacity).
Dispensing will stop automatically.
After the procedure, the machine will
return to its normal functions and the
boiler will be refilled with fresch water.
3
Soak the filters and the filter-
holders in this solution for
about 2 hours.