Introduction; Intended Use; Features; Package Contents - Parkside PBSG 95 B1 Originalbetriebsanleitung

DRILL SHARPENING MACHINE
PBSG 95 B1

Introduction

Congratulations on the purchase of your new appli-
ance. You have selected a high-quality product.
The operating instructions are part of this product.
They contain important information on safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the specified areas of application. Please also
pass on these operating instructions to any future
owner.

Intended use

The device is intended for sharpening steel drill bits
as per DIN 338, DIN 340, DIN 345, DIN 1869
and DIN 1897 (execution type N). It is not suitable
for carbide drill bits. Any other usage of or modifi-
cation to the appliance is deemed to be improper
and carries a significant risk of accidents.
The manufacturer accepts no responsibility for
damage(s) attributable to misuse. This appliance
is not intended for commercial use.

Features

Rotary switch ("STONE")
Sharpening stone cover
Screw cover for sharpening stone
ON/OFF switch
Sharpening stone
Spring
Fastening nut
Washer
Sharpening stone mount
Ventilation slits
Drill guide
│ GB │ CY
■ 2

Package contents

1 drill sharpening machine PBSG 95 B1
16 titanium-coated HSS drills (see fig. E)
2 spare sharpening stones
1 carrying case
1 set of operating instructions

Technical data

Dimensions:
Overall weight:
Sharpening stone:
Rated voltage:
Rated power consumption: 95 W
Rated idle speed:
For drill bit Ø:
Protection class:
Noise emission value:
Noise measurement value determined in accordance
with EN ISO 11201 and EN ISO 4871.
The A-rated noise level of the power tool is typically
as follows:
Idling:
Sound pressure level L
pA
Uncertainty K :
pA
Sound power level L
WA
Uncertainty K :
WA
Load (grinding):
Sound pressure level L
pA
Uncertainty K :
pA
Sound power level L
WA
Uncertainty K :
WA
221 x 174 x 103 mm
(W x D x H)
950 g
46 g
230–240 V ~ , 50 Hz
(alternating current)
n 1350 rpm
0
3–10 mm
II / (double insulation)
: 70.0 dB(A)
3 dB
: 83.0 dB(A)
3 dB
: 72.8 dB(A)
3 dB
: 85.8 dB(A)
3 dB
PBSG 95 B1