Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Cordless Impact Wrench
• To operate the tool in the reverse mode, use the
switch A. (See figures page 2)
The reverse selection indicator
To start the machine, pull the trigger (B). Release
the trigger to stop.
Tightening
• To operate the tool in forward mode, use the
switch A. (See figures page 2)
The indicator light of the latest selected for-
ward mode is on.
• Push the forward settings power selection but-
ton
to select one of the 4 settings describe
below.
2 shut off settings
Slow mode
To approach without impact-
ing.
Fast mode
To tighten wheels close to
recommend torque without
overtightening.
2 power settings
50 % of the maximum torque.
100 % of the maximum torque.
Maintenance instructions
• Follow local country environmental regula-
tions for safe handling and disposal of all
components.
• Maintenance and repair work must be carried
out by qualified personnel using only original
spare parts. Contact the manufacturer or your
nearest authorised dealer for advice on techni-
cal service or if you require spare parts.
• Always ensure that the machine is discon-
nected from energy source to avoid accidental
operation.
• Disassemble and inspect the tool every three 3
months if the tool is used every day. Replace
damaged or worn parts.
• To keep downtime to a minimum, the follow-
ing service kit is recommended : Tune-up kit
• Do not at any time let brake fluids, gasoline,
petroleum based products, penetrating oils, etc.,
come in contact with plastic parts. Chemicals
can damage, weaken or destroy plastic which
is on.
could result in serious personal injury.
• Avoid using solvents when cleaning plastic
parts. Most plastics are susceptible to damage
from various types of commercial solvents and
can be damaged by their use. Use clean clothes
to remove dirt, dust, oil, grease, etc.
Disposal
• The disposal of this equipment must follow the
legislation of the respective country.
• All damaged, badly worn or improperly func-
tioning devices MUST BE TAKEN OUT OF
OPERATION.
• The disposal of this equipment must follow the
legislation of the respective country.
• Repair only by technical maintenance staff.
General Power Tool Safety Warnings
WARNING Read all safety warnings, in-
structions, illustrations and specifications
provided with this power tool. Failure to fol-
low all instructions listed below may result in
electric shock, fi re and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or bat-
tery-operated (cordless) power tool.
Work area safety
• Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
• Do not operate power tools in explosive at-
mospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or
fumes.
• Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical safety
• Power tool plugs must match the outlet.
Never modify the plug in any way. Do not
use any adapter plugs with earthed
© Chicago Pneumatic - 8940175137
Safety Information
7
Werbung
Inhaltsverzeichnis
