Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
•
This machine is only designed for preparing coffee/espresso. You should
never use other extracts, cocoa powder or loose tea as these could block the
holes in the fi lter.
1 Lid
2 Pot
3 Handle
4 Disc fi lter
5 Sealing ring
6 Funnel-shaped fi lter
•
Unpack the device carefully.
•
If necessary, remove the pot from the water container (8). Hold the water con-
tainer tightly with one hand while turning the handle of the pot with the other
hand in the direction of „ ".
•
Take out all the accessories and the packing material.
•
Please read these operating instructions carefully and keep them in a safe place.
•
Before using the machine for the fi rst time, please rinse out the pot (2) once
and boil fresh water in the entire machine twice. Use only water without any
additives or ingredients.
•
Never forget to insert the disc fi lter (4) and the sealing ring (5) as it is possible
that the coffee will be pressed upwards.
1. Place the machine and the base on a fi rm and fl at surface. Position it so that it
cannot tilt over.
2. Remove the funnel-shaped fi lter (6). Fill the water container with clear water.
You can read off the level to which it is fi lled using the water level indicator
(inside the water container). Please do not overfi ll the kettle.
We recommend fresh soft water, as water containing salt or lime will
detract from the coffee aroma.
3. Replace the funnel-shaped fi lter in the water container.
4. Fill the funnel-shaped fi lter with coffee or espresso powder without pressing
the powder down. Place the coffee powder in the fi lter either in spoons or small
quantities in order to avoid fi lling in too much powder, which will then fall out.
Spread the powder evenly and remove any powder from the edge of the fi lter if
necessary.
Important: Please use high-quality medium-ground coffee powder pro-
duced specifi cally for espresso machines.
6....-05-KEM 2951 PC_Inox 39
Overview of the Components
First Use of the Machine
Operating the Device
7 Safety valve
8 Water container
9 ON switch with control lamp
10 Heating element
11 Base with cord take-up
12 Mains lead
GB
39
25.02.2005, 14:27:54 Uhr
Werbung
Inhaltsverzeichnis
