Getting Started; Preset Programs - Sage the Q BBL820 Kurzanleitung

Functions
ON OFF
CANCEL
1
MIX

GETTING STARTED

Ready mode
Press ON | OFF button to power the unit
to READY mode.
Sleep
After 2 minutes of inactivity, LCD powers off,
and the ON | OFF button flashes red.
After 5 minutes of inactivity, the blender turns
power OFF. Press the ON | OFF button to
reactivate the blender.
CANCEL
The CANCEL function stops the pre-set
program or selected speed setting and sets
the time to 0.
Speed Control Selection
There are 5 electronic speed buttons from
MIX through to MILL.
MIX combines more delicate foods with a
folding motion, and is good for combining wet
and dry ingredients.
MILL is the fastest setting and is ideal for
breaking down ingredients to mill grain to flour,
make nut milk and other finely blended mixtures.
Select the required speed (1 to 5) by pressing
the corresponding speed button.
AUTO SMOOTHIE
PULSE
ICE CRUSH
2
3
CHOP
BLEND
GREEN SOUP
SMOOTHIE
COLD
TO HOT
5
4
MILL
PUREE
WARNING
Never blend boiling hot liquids. Allow
temperature of ingredients to cool down to room
temperature before placing into blender jug.

PRESET PROGRAMS

PULSE | ICE CRUSH
A program of continuous pulsing designed to
chop food into an even consistency or crush ice
cubes.
SMOOTHIE
For dairy-based smoothies. A combination of
speeds and pulses designed to combine and
aerate ingredients into a smooth and creamy
texture.
GREEN SMOOTHIE
For blending whole fruits/vegetables into a
smooth beverage. A combination of high speed
profiles breaks down tough fibres into very fine
particles. Use the tamper if ingredients become
wedged.
SOUP
This program is exclusively for creating a Cold to
Hot Soup–turning whole ingredients at ambient
temperature into a smooth, hot soup. Primarily a
high speed program, the program will finish with
a slow stir to remove steam bubbles.
EN
OVERLOAD
PROTECTION
RESET
MIN SEC
PAUSED
CLEAN
7