Transferring Measurements Via Bluetooth - Silvercrest 297903 Gebrauchsanleitung Und Sicherheitshinweise

If you have activated Bluetooth
will be transferred. The blood pressure monitor displays
the symbol for Bluetooth
the blood pressure monitor off by pressing the START /
STOP button once more.
To power down press the START / STOP button
Note: The device switches off automatically after one
minute if no button has been pressed. Wait for at least
5 minutes before taking another measurement!
Transferring measurements
via Bluetooth
You have the option of transferring the measured values
and values saved on your device to your smartphone using
Bluetooth low energy technology.
®
Activate Bluetooth
open the „HealthForYou" app.
Note: The "HealthForYou" app must be open for trans-
fer to occur.
Add „SBM67" in the app.
A randomly generated six-digit PIN code will be shown
on the blood pressure monitor. At the same time, an en-
try field will appear on your smartphone, where you
should enter this six-digit PIN code. You can begin to
transfer your measurement values after the product has
been successfully connected.
®
transfer during transfer. Switch
®
®
in your smartphone settings and
®
data transfer, the data
GB/MT
.
8
123