Herunterladen Inhalt Inhalt Diese Seite drucken

Preparation For First Use - Holmatro GTR 53xx EVO 3 serie Betriebsanleitung

Akku-teleskopzylinder
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 75
EN
Description
Pos
Grip head
4
5
-
Cross support
6
7
6+7
3.8.3
Grip head
Two grip heads are delivered by default with every ram. Extra grip heads can be ordered if desired.
3.8.4
Ram support
The ram support is an accessory used for bodywork in an unstable condition. It provides a safe push-off
point to prevent slipping. The ram support has three push-off points and can be used in combination
with every ram. The push-off points are recognizable as bars on which the grip head can be placed.
3.8.5
Extension pipe
An extension pipe makes it possible to spread over a greater length. The extension pipes are made so
they can only be placed on the fixed side of the ram. Not every model ram can be fitted with an
extension pipe. There are different lengths available, depending on the model.
Never use more than one extension pipe at the same time. Always use a grip head or other accessory
at the end of the extension pipe.
3.8.6
Grip head with laser
A grip head with laser allows to highlight the area where the grip head may contact the vehicle. A grip
head with laser can only be placed on the plunger side of the tool.
WARNING
Do not look into the laser beam.
(Class 2 laser product according to DIN EN 60825-1 : 2008-05 l=650 nm P0<0.75 mW)
3.8.7
Cross support
The cross support is an accessory to apply the force of a ram on a larger area of a weak structure.
They cross support has a push-off bar in the centre on which the grip head can be placed.
It can be used in vehicles:
between a dashboard and the rear seat.
against the roof and floor.
4

Preparation for first use

4.1
General
Examine the equipment for completeness and damage. Do not use the equipment if it is damaged;
in that case contact the Holmatro dealer.
Examine the operation of the deadman's handle. when released, the deadman's handle must return
to the neutral position.
Before first use, charge the battery pack fully. Refer to section 5.2.
40
Model
laser pointer
basic
base side
XRS01L
XRS01S
XRS01
916.400.015_006
GTR 5340 (LP) EVO 3
150.182.333
150.014.668
150.007.279
151.001.007
151.001.161
151.001.164
GTR 5350 (LP) EVO 3
150.014.668
GTR 53* (LP) EVO 3

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis