Optional Accessories; Assembly; Assembling The Safety Bars - ultraMEDIC SAN-9000 Bedienungsanleitung

3.3

Optional accessories

Order no.
SAN-0086
SAN-9005-H
SAN-0097
SAN-9005-V
Additional supplementary products can be viewed on our Internet page under
www.ultramedic.de or in our catalogue. .

4. Assembly

The ultraROLL-STRETCHER is not delivered in pre-assembled state.
Observe the following steps during assembly:
4.1.

Assembling the safety bars:

1. Remove the contents from the carrier bag. Ensure that all parts are available in
accordance with the delivery scope.
2. Bend back the base plate so that it can lie flat on the ground.
3. Assemble the foot support and horizontal bars. When assembling the horizontal
bars, observe the difference in reinforcement length. The shortest reinforcement is
assembled first following the assembled foot support, the longest reinforcement
of the horizontal bar is located underneath the head support.
Designation
ultraBRIDLES
Length-adjustable transportation gear
ultraFIX-HORIZONTAL
Horizontal transportation gear
ultraFLEX
Flexibly adjustable transportation gear
ultraFIX-VERTICAL
Fixed transportation gear for vertical suspension
12
Image