Detection Mode Settings - Alcatel Vacuum Technology adixen H2000 PLUS 5.0 Serie Benutzerhandbuch

Detection Mode Settings

Note! Detection Mode settings only af-
fects Detection Mode. To calibrate the
Analysis Mode, see page 29.
If Direct Sensitivity Adjustment is
OFF, Sensitivity can be adjusted as descri-
bed below.
The chosen Sensitivity will only be sto-
red in memory if adjusted in the menu
system.
Select the main menu Detection Mode
Settings as described on page 11.
1. Press Enter.
2. Select:
Sensitivity
Auto Range
Direct Sensitivity Adjustment or
Lowest Frequency
3. Press Enter.
4. Adjust the desired parameter using the
+ and – buttons.
(5. Press Undo to delete the setting and
revert to the previous value.)
6. Press Save to save the set value. The
value will flash to confirm the setting.
Revert to Detection Mode/Analysis
Mode/Combined Mode by pressing
Esc twice.
Esc
Esc
Undo
5
Adixen Scandinavia - User's manual H2000 PLUS
Detection Mode Settings
< > Enter
1
Detection Mode Settings
Sensitivity

< > Enter
2 3
Detection Mode Settings
Sensitivity
Set Sensitivity

+ – Save
4 6
GB
1