Samsung HW-N450 Handbuch Seite 35

11 TROUBLESHOOTING
The unit will not turn on.
A function does not work when the button is pressed.
Sound dropouts occur in BT mode.
Sound is not produced.
The remote control does not work.
The red LED on the subwoofer blinks and the subwoofer is not producing sound.
The subwoofer drones and vibrates noticeably.
Before seeking assistance, check the following.
Is the power cord plugged into the outlet?
; Connect the power plug to the outlet.
Is there static electricity in the air?
; Disconnect the power plug and connect it again.
; See the Bluetooth connection sections on pages 12 and 18.
Is the Mute function on?
; Press the VOL button to cancel the function.
Is the volume set to minimum?
; Adjust the Volume.
Are the batteries drained?
; Replace with new batteries.
Is the distance between the remote control and Soundbar main unit too far?
; Move the remote control closer to the Soundbar main unit.
This issue can occur if the subwoofer is not connected to the Soundbar main unit.
; Try to connect your subwoofer again. (See page 6.)
Try to adjust the vibration of your subwoofer.
; Push the WOOFER button on your remote control up or down to adjust the subwoofer volume.
(to -12, or between -6 ~ +6).
ENG - 31