Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Care and maintenance
•
Always unplug the lead from the power point and let the fan heater cool down
properly before cleaning it.
•
Clean the fan heater using a lightly moistened cloth. Use only mild cleaning agents,
never solvents or corrosive chemicals.
•
Store the fan heater in a cool, dry place out of children's reach when not in use.
Overheating protection
•
The fan heater has a built-in thermal over-temperature protection device.
If the overtemperature protection is triggered, the fan heater is automatically
shut off. Once the fan heater has cooled, it will work again as normal.
•
The over-temperature protection device is reset by unplugging the fan heater from
the power socket. Wait for 5 to 10 minutes for the fan heater to cool before plug-
ging it in and using it again.
•
As an extra safety measure the fan heater is also fitted with a thermal fuse safety
cut-off.
•
This thermal fuse cannot be reset, so if it has blown the fan heater cannot be
reused and should be disbanded.
Troubleshooting guide
The fan heater does
not start.
Disposal
This product should be disposed of in accordance with local regulations.
If you are unsure how to proceed, contact your local council.
Specifications
Supply voltage
220–240 V, 50 Hz
Heat setting
l 700 W, ll 1400 W
1.4 m
Mains lead
25 × 21 × 8 cm
Size
930 g
Weight
•
Make sure that the fan heater is standing upright
and that it is placed on a level surface, otherwise
the tip-over switch might have been triggered.
•
Is the mains lead or plug damaged?
•
Check that the wall socket is live.
5
Werbung
Inhaltsverzeichnis
Fehlerbehebung
