Installation Of The Appliance; Room Ventilation; Installing Accessories - Angelo Po 091CP1G Bedien- Und Installationshandbuch

All installation stages must be considered right from
production of the general layout.
Before starting these stages, as well as deciding
the place of installation, if necessary, the person
authorised to carry out these operations must or-
ganise a "safety plan" to protect the people directly
involved, and he must also ensure strict compliance
with all legal requirements, especially those relating
to mobile work-sites.
The place of installation must have all the connec-
tions needed to supply the appliance and dispose of
the production residues, must be suitably lit and
must meet all legal health and hygiene require-
ments to prevent the contamination of the foods.
If necessary, fix the exact position of each individual
appliance or subassembly by mark coordinates to
locate them correctly.
The room where the appliance is installed must
have air inlets to ensure that the appliance can op-
erate correctly and provide the necessary air ex-
change in the room itself.
IT
The air inlets must be of appropriate size and must
be protected by gratings and placed so that they
cannot be obstructed.
GB
DE
FR
ES
Screw the feet (A) onto the structure in the connec-
tion points.
English

INSTALLATION OF THE APPLIANCE

ROOM VENTILATION

INSTALLING ACCESSORIES

Appliances must be at some distance from the wall
(at least 5 cm if the wall is not designed to be resist-
ant to a temperature of at least 150° C ).
Install in accordance with the relevant legislation,
regulations and specifications in the country of use.
- 14 -
IDM-39614901200.tif
IDM-39614901300.tif
A
IDM-39614401500.tif