Battery Removal; Product Specifications - Amibot Flex serie Handbuch

Battery Removal

1. Remove the screws on battery cover with a screw driver.
2. Remove the battery cover.
3. Grasp the insulating tape at two sides of the battery and lift the battery.
4. Unplug the wire connector that links the battery and robot.
Note: Only use the original battery of the product, otherwise it may cause product damage.

Product specifications

Classification
Mechanical
Specifications
Electrical
Specifications
Cleaning
Specifications
Main Body Button Type
Note: Particular specifications are subjected to change without prior notice. The warranty
does not cover damage caused by rusting, a collision or misuse. Accessories are not
covered by the warranty.
Item
Diameter
Height
Weight
Power Rating
Battery Specifications
Dust Bin Capacity
Charging Type
Cleaning Mode
Charging Time
Cleaning Time
Detail
340mm
88mm
3.3Kg
14.4V
Ni-MH 2400mAH
0.5L
Auto Charging/ Manual Charging
Auto, Spot, Edge, Zig-zag, Schedule
240~360 mins
90 mins at max
Touch (LED display)
22