Inhaltsverzeichnis
Werbung
http://www.atlas-tools.ru
46
АТЛАС - ОБОРУДОВАНИЕ для АВТОСЕРВИСА
Rilevamento Problemi
7.0 Trouble shooting
If a problem with the
proceed in the following order to solve the problem:
1. Rethink the last steps taken.
Did you work according to the manual?
Did the balancer work as described and expected?
2. Check the balancer according to the list in this
chapter.
3. Call your local sales agent for technical assistance.
The format of this section is:
Problem
1. Possible cause #1
Possible solution(s)
•
2. Possible cause #2
• Possible solution(s)
When depressing the turntable rotation pedal the
machine will not work.
1. No electric power.
• Check that the electric plug is correctly fitted to the
socket and that the electric power is on.
2. Switch or motor short circuited.
• Check that the electrical requirements
of the machine are the same as the supply.
• Call the authorized service center for assistance.
The switch pedal does not return to neutral
position.
1. Switch spring is broken.
• Lift the pedal to neutral position.
• Disconnect the machine from electric and air supply.
• Call the authorized service center for assistance.
Turtable or bead breaker pedal hard to operate.
2. Valve spools dry.
• Check lubricator efficiency and oil level.
Bead breaker cylinder lacks power.
1. Low air pressure.
•
•
2. Cylinder seals worn.
•
Operator's Manual
pneumatic electric tire changer
Clean valve.
Check air pressure.
Call the authorized service center for assistance.
+7 (863) 226-92-88
,
SMASH 24GT
Werbung
Inhaltsverzeichnis
