Setup / First Use; Display Indicators; Operation - Silvercrest SSE 4.5 B2 Bedienungsanleitung

Setup / First use

1) Place the appliance on a suitable, level surface.
2) Open the lid 2.
3) Pull the plug 1 from the refi ll opening q.
4) Pour liquid soap into the soap tank.
NOTE
► During fi lling, note the "Max" mark that is visible, if you look into the
soap tank. Never exceed the "Max" mark when fi lling with soap!
Otherwise, the appliance may overfl ow.
Pour in at least 70 ml of soap; otherwise, the "Fill level" indicator e
►
will fl ash.
5) Replace the plug 1 into the refi ll opening and close the lid 2.
6) Remove the protective fi lm from the display 8.
The appliance is now ready for use.

Display indicators

The "Soap quantity" indicator w shows the amount of soap dispensed for each
■
use.
The "Fill level" indicator e shows how much soap remains in the soap tank.
■
The fewer bars are visible, the less soap there is in the soap tank. If only one bar
remains in the fi ll level, the "Fill level" indicator e begins to fl ash. Refi ll the soap
tank.
The "Battery" indicator r shows the charge level of the batteries that have
■
been inserted. If only one bar remains in the "Battery" indicator r, you should
replace the batteries soon.

Operation

1) Set the quantity of soap you want dispensed for each use. Press the "+"
button 0 or "-" button 9 repeatedly until the desired setting is displayed.
You can select from four soap quantities. The more drops displayed in the
"Soap quantity" indicator w, the more soap is dispensed.
■ 6
│ GB│CY
SRR 4.5 B2