How To Tilt The Front Panel - Toyota TNS400 Bedienungsanleitung

2. Remove the TomTom.
Hold the TomTom on the right side, lift up and pull it toward you to remove it.
Attention:
• When the TomTom is removed, do not touch the back of it.
• When attaching the TomTom, do not press the monitor display.
• If the TomTom gets wet, do not attach it to the main unit.
• After removing the TomTom from the main unit, you are recommended to use the optional
Audio Cover for the main unit.
How to insert the TomTom
1. Insert the left end of the TomTom into the main unit.
Engage the catch at the left end of the TomTom with the lock on the main unit.
2. Insert the TomTom.
Press the right end of the TomTom until it clicks into place.

4.. How to tilt the front panel

Press and hold the [
The front panel will tilt upwards one step at a time into one of the 6 positions.
Caution: When tilting the front panel, make sure that the USB memory is surely extracted.
The USB memory may interfere with other objects and this may damage the USB memory.
0 TNS400
(OPEN/EJECT)] button.