Operation; Stand-Alone Mode; Control Board - EuroLite LED LP-30 Bedienungsanleitung

OPERATION

After connecting the device to the mains it is ready for operation. The display lights up and you can choose
the desired mode via the buttons MENU, ENTER, UP, DOWN.
The device has two operating modes. It can be operated in stand-alone mode via the control board and the
EUROLITE IR-13 remote control or in DMX-controlled mode via a standard DMX controller and wireless via
QuickDMX with the optional available EUROLITE QuickDMX USB Wireless Transmitter/Receiver.

Stand-alone mode

In the stand-alone mode, you can do without a controller. Disconnect the device from the controller and call
the desired setting. Please refer to the instructions under Control Board.

Control Board

The Control Board offers several features: you can easily set the starting address or select a DMX channel
mode.
Browse through the menu by pressing Up or Down. Press Enter in order to select the desired menu. You can
change the selection by pressing Up or Down. Press Enter in order to confirm. The functions provided are
listed in the following sections.
Default settings shaded.
Menu
Menu level 2
level 1
ADDR 001-512
CHMD 2CH, 3CH, 4CH
FLAS 00-99
UL-- 000-255
GOBO 000-255
10S/30S/
LED
60S/90S
MODE off-dIn4
VERN VX.X
REST YES/NO
Description
DMX start address setting
Setting DMX channel mode
Strobe effect (Master)
00-99 (with increasing speed)
Dimmer intensity (Master)
000 – 255 (increasing)
Gobo rotation (Master)
000-150 Gobo indexing
151-200 Forwards gobo rotation with increasing speed
201-205 No rotation
206-255 Backwards gobo rotation with increasing speed
Display shutoff
Shuts off the display after about 10, 30, 60 or 90 seconds
Dimmer speed (step response)
off: Response characteristics of LEDs
dIn1: Response characteristics of halogen lamps, fast
dIn2: Response characteristics of halogen lamps, less fast
dIn3: Response characteristics of halogen lamps, middle
dIn4: Response characteristics of halogen lamps, slow
Firmware version
Restore factory settings
All settings will be set back to the default values (shaded).
22/28 00125717.DOCX, Version 1.0