Heidolph Hei-VAP Value Originalbetriebsanleitung Seite 14

Start-Up
Connecting/disconnecting power cord
Connect power cord
The power cord comes with a three-wire
plug and a recess on the bottom side.
The socket is located on the back side of
the device.
The device is switched OFF.
Connect plug to the socket with the
recess facing down.
Push plug up against socket until
securely attached.
Connect plug to power socket.
Disconnect power cord
Disconnect plug from power socket rst.
Then disconnect plug from socket on device.
witching the device on and o
The ON/OFF switch is situated on the left
side of the device beneath the control panel.
Switch device on
Press the ON/OFF switch on the left side.
Hei-VAP Value
The operating indicator light
switches on.
Hei-VAP Value Digital,
Hei-VAP Advantage
The display switches on and shows
set parameters.
The device is switched on.
witch device o
Press the ON/OFF switch on the left side.
Hei-VAP Value
The operating indicator light switches o .
Hei-VAP Value Digital,
Hei-VAP Advantage
The display switches o .
The device powers o .
Start-Up
Unit plug
Unit socket
ON/OFF switch: ON
Power cord