Description Of Controls - System4 06WCP1GM Bedien- Und Installationshandbuch

DESCRIPTION OF CONTROLS

The appliance is fitted with the controls for use of its
main functions.
A)Burner control knob: for lighting, turning off and
regulating the relative burner and pilot light
Manual filling mark
Slow automatic
B
filling mark
SWITCHING THE BURNER ON AND OFF
Lighting
1 - Turn on the gas supply tap
2 - Press the knob (A) and turn it anti-clockwise
(pos. 1), while keeping button (B) pressed, to li-
ght the pilot light.
3 - Keep the knob pressed for about 15 sec. to pri-
me the thermocouple.
4 - Turn the knob (A) anti-clockwise (pos. 2) to light
the burner.
5 - Turn the knob (A) gradually anti-clockwise to
adjust the power of the flame down to the mini-
mum setting (pos. 3).
Turning off
1 - Turn the knob clockwise (pos. 1) to turn the bur-
ner off. The pilot light will remain on to allow the
burner to be re-lit.
2 - Turn the knob clockwise (pos. 4) to turn off the
pilot light.
3 - Turn off the knob to ensure safety.
Off marker
D
Quick automatic
filling mark
B)Water control knob: for filling the well in the va-
rious ways available.
C)Piezoelectric ignition button: for lighting the pi-
lot light.
D)Mains light: indicates that the appliance is rece-
iving electrical power.
Off marker
Pilot light marker
Full power
Minimum pow-
er marker
A
A
4
- 7 -
C
B A
D C
marker
IDM-39610901300.tif
1
2
3
IDM-39610901400.tif
A B
IT
GB
DE
FR
ES
English