Switching On / Off; Setting The Speed; Reversing The Direction Of Rotation; Tips And Tricks - Parkside PSBS 24 A1 Bedienungs- Und Sicherheitshinweise

Preparing for use / Maintenance and cleaning / Service / Warranty
©
Switching On / Off
To start the device, press the ON / OFF switch
and keep it pressed.
To switch off the device, release the ON / OFF
switch .
6
©

Setting the speed

The ON / OFF switch
6
regulator.
Increasing the speed:
Increase the pressure on the ON / OFF
switch .
6
Reducing the speed:
Reduce the pressure on the ON / OFF switch
The integral motor brake quickly brings the
device to a standstill – which is ideal e.g. for
screwing in a series of screws.
© Reversing the direction
of rotation
Push the direction of rotation switch
through to the right or left to reverse the direc-
tion of rotation.
©

Tips and tricks

Drilling in metal: Use a metal drill bit (HSS).
For the best results, you should cool the bit with oil.
Metal drill bits can also be used to drill into plastic.
Drilling in stone: Use a hardened-metal-tipped
masonry drill bit.
Drilling in wood: Use a wood drill bit with a
centring point. For deep holes, use an auger type
bit. For large diameter holes, use a forstner bit. You
can screw small screws into soft wood without the
need for pre-drilling.
12 GB/IE/CY
All manuals and user guides at all-guides.com
6
has a variable speed
6
5 fully
©

Maintenance and cleaning

The cordless impact drill / driver is maintenance-free.
Clean the device frequently. This should be done
immediately after you have finished using it.
Use a dry cloth to clean the outside of the
device - never use petrol, solvents or cleaners.
Never open up the device.
WARNING!
Always have any repairs carried out or replace-
ment parts fitted at the service centre or by an
electrical equipment repair specialist.
©

Service

Have your device repaired
WARNING!
at the service centre or by qualified
specialist personnel using original
. manufacturer parts only. This will ensure
that your device remains safe to use.
If the plug or lead needs
WARNING!
to be replaced, always have the
replacement carried out by the manu-
facturer or its service centre. This will
ensure that your device remains safe to use.
©

Warranty

The warranty for this appliance is for 3
years from the date of purchase. The ap-
pliance has been manufactured with care
and meticulously examined before deliv-
ery. Please retain your receipt as proof
of purchase. In the event of a warranty
claim, please make contact by telephone
with our Service Department. Only in this
way can a post-free despatch for your
goods be assured.
The warranty covers only claims for material and
maufacturing defects, but not for transport damage,
for wearing parts or for damage to fragile compo-
nents, e.g. buttons or batteries. This product is for
private use only and is not intended for commercial
use.