4. connect the appliance to the mains.
5. Choose the desired temperature (7) and switch ON the
appliance by pressing the ON/Off switch (6). The red
indicator light (5) will illuminate and the heating process
will start.
Note: If no temperature is chosen, the appliance will not
switch on.
6. Once the chosen temperature has been reached the red
indicator light goes off and the orange indicator light lights
up.
7. To prepare your desired beverage (instant coffee, tea,
instant soup, etc.) place a cup or flask underneath the tap
(8).
Note: Various beverages, e.g. teas, need a special
temperature to unfold their aroma.
8. Press down the tap lever (9) to pour the desired amount
of water into a cup or flask. Once pressed down, the lever
will hold into position.
9. Once the cup or flask is filled with the desired amount of
water push the lever back into its original upward position.
the tap will close automatically.
Always make sure that during use the water level will
never go beyond the minimum water level indicator.
Note: If you wish to adjust the water temperature during
the heating process:
- Switch off the appliance by pressing the ON/OFF button.
- Choose the desired temperature and press the On/Off
button to switch the appliance back on.
You can stop the boiling process any time by pushing the
On/Off button.
22