Time Zone Setting - Explore Scientific RDC1005-CM3000 Bedienungsanleitung

2. The setting parameter will flash.
3. Sequence of setting: Weekday Language
12/24 Hr  Year (2000 – 2099)  Date
format  Month  Date  Hour  Minute
 Zone  °C/°F  exit
4. Press [ ] button once, the figure will
increase 1 unit (when setting minute, second
will reset to 0). Press and hold the [
button, the figures will increase rapidly.
5. Press [ ] button once, the figure will de-
crease 1 unit (when setting minute, second
will reset to 0). Press and hold the [
ton, the figures will decrease rapidly.
6. Press [
and enter to next parameter.
7. If there is no action in 20 seconds, the setting
will be saved and will exit the setting mode.
34
] button to confirm setting
LANGUAGE
Sequence of setting weekday language:
German (GER)  English (ENG)  French
(FRE)  Italian (ITA)  Dutch (DUT).

TIME ZONE SETTING

To set a different time zone, proceed as fol-
] lows:
1. Press and hold [
and date setting.
2. Press [
] but- the display shows the time offset "Zone 00"
3. Press the [
[ ] button to decrease the Time zone
offset.
°C/°F SETTING
1. Press and hold [
and date setting.
2. Press [
] button, enter time
] button several times until
] button to increase or
] button, enter time
] button several times until