Installation Rules - Faema Barcode New Touch Gebrauch Und Installation

2.2 Installation Rules

• Before plugging in the machine, make sure that the information on the nameplate (voltage, etc.)
matches that of the electrical and water systems.
• Check the condition of the power supply cord; if it is damaged it must be replaced.
• Completely unwind the power supply cable.
•
counter. Keep in mind that the highest surface on the machine (the cup warmer tray) sits at a
height of at least 1.2 meters. Make sure there is a shelf nearby for accessories.
• Room temperature must range between 10° and 32°C (50°F and 90°F).
• An electrical outlet, water connections, and a drain with siphon must be in the immediate vicinity.
• Do not install in rooms (kitchens) that are cleaned with jets of water.
• Do not obstruct openings or ventilation and heat vents.
• Do not install the machine outdoors.
4 EN