Available Operations - Yamaha DVX-S200 Bedienungsanleitung

When the Remote Control's TV, VCR or MD/
CD-R button does not work even after
setting the device manufacturer code
Try again from step 1 and keep the following points in
mind.
• Make sure you select the Remote Control's TV, VCR
or MD/CD-R button correctly when setting the
manufacturer code.
• If there are multiple manufacturer codes enter them in
order.
• After reinserting batteries, try the steps again (within 2
minutes of reinserting).
(When reinserting batteries be careful not to press the
Remote Control buttons. If a manufacturer code has
been set for the TV, VCR or MD/CD-R button, it may
get deleted.)

Available Operations

1
* TV Channel Selection (+)
* 1 TV Channel Selection (-)
Video Channel Selection (-)
1
* TV Volume (+)
1
* TV Volume (-)
* 1 While you set the TV manufacturer code for the TV button, you can operate your television.
While you set the manufacturer code for the TV, MD/CD-R or VCR button,
you can use the following functions after you press the TV, MD/CD-R or VCR
button.
VCR operation
POWER
AUDIO
/DTS SELECT
NIGHT
TV CH
PRESET
Rewind
ON SCREEN
CH
STATUS
TV VOL
DVD/CD
MD/CD-R
MOVIE MUSIC
CINEMA
Operating Other Equipment with the CinemaStation Remote Control
To return to the factory default settings
While pressing SHIFT down as in step 2 Setting the
Manufacturer Code, enter 299 for TV, 399 for VCR and
499 for MD/CD-R. (Step 3 is not necessary.)
Maintaining manufacturer code settings
Replace batteries before they become unusable. When
the batteries wear out and you remove them, the custom
manufacturer code setting will stay in memory for about
2 minutes. Be careful because if more than 2 minutes
elapse the codes may be deleted. Also, at this time, be
careful not to accidentally press a Remote Control
button. This can delete the codes.
DVR-S200 WB56620
POWER
* 1 TV POWER
TV
ANGLE SUBTITLE
MATRIX 6.1 STEREO
REPEAT A-B
SW CENTER SURR
SHIFT
1
* TV Input Switch
TV INPUT
A B C D E
Stop
SLEEP
PRESET
Fast Forward
Pause
MENU
Playback
SET MENU
Video Channel Selection (+)
CH
ENTER
RETURN
TEST
VOLUME
MUTE
AMP
VCR VIDEO 1
Press VCR or MD/CD-R before starting
operations.
TUNER VIDEO 2
SPORTS GAME
85