Werbung
Verfügbare Sprachen
Verfügbare Sprachen
E N G L I S H
POWER SUPPLY
Use a screwdriver to open
the battery compartment.
Insert 6 x 1.5 V batteries
R6/AA (not supplied),
ensuring correct polarity.
Re-fit
battery
cover.
Replace batteries when
the quality of sound
becomes bad. Use alkaline
batteries to obtain a longer duration.
ATTENTION - BATTERY CARE:
Non-rechargeable batteries are NOT to be recharged. • Rechargeable batteries
must be removed from the product before being charged. • Rechargeable
batteries are only to be charged under adult supervision. • Different types of
batteries or new and old batteries are not to be mixed. • Use only batteries of
the same or equivalent type. • Batteries are to be inserted with correct
polarity. • Remove exhausted batteries to prevent leakage. • Do not short
circuit supply terminals. • Remove batteries during long periods of non-use.
WASTE DISPOSAL STANDARDS
For information regarding the disposal of the items mentioned here below,
please refer to Council Administration office regarding specialised waste
collection centres.
1. DISPOSAL OF BATTERIES: Protect the environment by
disposing of batteries in the special containers provided
for this use.
2. PACKAGING DISPOSAL: Take the paper, cardboard and corrugated board to
the appropriate waste collection centres. Plastic material must be placed in
the relevant collection containers.
The symbols indicating the various types of plastic are:
01
02
03
PET
PE
PVC
Key for the different types of plastic materials:
PET= Polyethylene terephtalate • PE= Polyethylene, code 02 for PE-HD, 04
for PE-LD • PVC =Polyvinyl chloride • PP= Polypropylene • PS= Polystyrene,
Polystyrene foam • O= Other polymers (ABS, Laminates, etc.)
3. DISPOSING OF ELECTRICAL APPLIANCES: The wheelie bin
symbol with a cross indicates that the product must not be
disposed of in the domestic waste at the end of its useful life.
Instead, it should be taken to your nearest designated collection
point or recycling facility. Alternatively, check with your retailer and return
the product when buying a replacement, on a one-to-one basis or as free of
charge in case the size is smaller than 25 cm. Appropriate disposal promotes
the recycling of parts and materials, as well as helping to protect the
environment and human health. Under current legislation, strict penalties
are enforced against those disposing of products illegally. For more
information about the collection of special waste, contact your Local
Authority.
R6/AA 1.5V
R6/AA 1.5V
R6/AA 1.5V
R6/AA 1.5V
R6/AA 1.5V
R6/AA 1.5V
R6/AA 1.5V
R6/AA 1.5V
R6/AA 1.5V
R6/AA 1.5V
R6/AA 1.5V
R6/AA 1.5V
05
06
07
PP
PS
O
SWITCH ON/OFF
Switch on the device turning the
USING THE MICROPHONES
To amplify your voice, connect one or two microphones
a
to the mic.1
or mic.2
d
with the mic. +/–
knob.
HOW TO SING ACCOMPANIED BY MUSIC
A) Using the jack cable
f
With the jack cable
external audio source (MP3 player, iPod, smartphone,
etc., not supplied).
1. Insert the cable into the mp3 socket
2. Insert the other end of the cable into the
"HEADPHONE" socket
other audio source.
3. Turn on the player, or other music sources and adjust
the volume to balance the voice with the music; the
reproduction will be monophonic because of the
instrument.
B) Using Bluetooth
This amplifier can be connected to a smartphone via the
wireless technology.
1. With Bluetooth on, your smartphone will look for the
"CZ-B003T" device, which is exactly the name of your
amplifier.
2. After connecting the "CZ-B003T" device to the
smartphone, find a song on your playlist and play it.
You can now listen to the song from the amplifier.
MUSIC VOLUME
You can adjust the volume of the music playing either
from your player or by turning the music volume +/–
e
knob.
a b c
d
on/off
knob
c
sockets. Adjust the volume
supplied you can connect an
b
.
g
of your music player or
d
e
.
1
Werbung
