Setting The Digital In Assignment - Denon AVR-2805 Bedienungsanleitung

ENGLISH
3
Setting the Input Setup
1
At the System Setup Menu select "Input Setup".
(Remote control unit)
2
Display the Input Setup Menu screen.
(Remote control unit)

3-1 Setting the Digital In Assignment

• This setting assigns the digital input jacks of the AVR-2805 for the different input sources.
1
At the Input Setup Menu select "Digital In Assign".
(Remote control unit)
2
Display the Digital Inputs screen.
(Remote control unit)
3
Select the digital input jack to be assigned to
the input source.
q Select the input source
(Remote control unit)
w Select the digital input
jack
(Remote control unit)
Select "OFF" for input sources for which no
digital input jacks are used.
If "Yes" is selected for "Default", the
settings are automatically reset to the
default values.
22
* S y s t e m S e t u p
I n p u t S e t u p
* I n p u t S e t u p
D i g i t a l I n
* D i g i t a l I n
C D : C O A X 1
4
Enter the setting.
The Input Setup Menu
reappears.
(Remote control unit)
NOTES:
• The OPTICAL 3, 4 jacks on the AVR-2805's rear
panel are equipped with an optical digital output
jack for recording digital signals on a CD recorder,
MD recorder or other digital recorder. Use this for
digital recording between a digital audio source
(stereo - 2 channel) and a digital audio recorder.
• Do not connect the output of the component
connected to the OPTICAL 3, 4 OUT jack on the
AVR-2805's rear panel to any jack other than the
OPTICAL 3, 4 IN jack.
• "PHONO" and "TUNER" cannot be selected on
the Digital In Assignment.
3-2 Setting the Ext. In Subwoofer Level
• Set the method of playback of the analog input signal connected to the Ext. In Subwoofer.
1
Select "Ext. In Subwoofer Level" at the Input Setup
Menu.
* I n p u t
E x t . I n
(Remote control unit)
2
Display to the Ext. In Subwoofer Level screen.
(Remote control unit)
* E x t . I n
S W
3
Select the desired setting.
Select according to the specifications of the player being used. Also refer to the
player's operating instructions.
+15 dB (default) recommended. (0, +5, +10 or +15 can be selected.)
(Remote control unit)
4
Enter the setting.
The Input Setup Menu reappears.
(Remote control unit)
S e t u p
S W L e v .
S W L e v .
L e v . : + 1 5 d B