Denon AVR-2805 Bedienungsanleitung Seite 17

1-6 Check the EQ parameter
• The frequency characteristic of each speaker is rectified and the tone of the speaker is unified.
The EQ parameters that were set in Auto Setup can be checked.
This item is automatically displayed, after the measurement result of the "Auto Setup / Room EQ" is decided.
1
Select "EQ Parameter Check" at the Auto Setup / Room
EQ Menu.
* A u t o S e t / R o o m E Q
P a r a m e t e r
(Remote control unit)
2
Display the EQ Parameter Check screen.
(Remote control unit)
* P a r a m e t e r C h e c k
1 : N o r m a l
3
Select the Equalizer curve.
(Remote control unit)
4
Dislay the parameter screen.
(Remote control unit)
7
(Remote control unit) (Remote control unit)
8
(Remote control unit) (Remote control unit)
C h e c k
5
Select the speaker channel.
(Remote control unit)
6
Enter the setting.
(Remote control unit)
If the check ends, select "Exit"
and press the ENTER button.
The Auto Setup / Room EQ
Menu reappears.
Select "Exit" and press the
ENTER button at the Auto Setup
/ Room EQ Menu screen.
The System Setup Menu
reappears.
ENGLISH
17