Removing The Lens - Sony ILCE-6300 Gebrauchsanleitung

x

Removing the lens

1
Press the lens release button all the way in and turn the
lens counterclockwise until it stops.
Notes
• If dust or debris gets inside the camera while you are changing the lens and
adheres to the surface of the image sensor (the part that converts the light source to
a digital signal), it may appear as dark spots on the image, depending on the
shooting environment. The camera vibrates slightly when it is turned off, due to
the anti-dust function, to prevent dust from adhering to the image sensor.
However, attach or remove the lens quickly somewhere away from dusty
locations.
• If any foreign material has adhered to the image sensor, try [Cleaning Mode] first
and dust it off with a blower if necessary. For details, refer to the "Help Guide."
• Do not leave the camera with the lens removed.
• When you want to use body caps or rear lens caps, please purchase ALC-B1EM
(Body cap) or ALC-R1EM (Rear lens cap) (sold separately).
• When you use a lens with a power zoom, set the ON/OFF (Power) switch of the
camera to OFF and confirm that the lens is completely retracted before switching
lenses. If the lens has not retracted, do not press the lens in by force.
• When attaching the camera to a tripod, be sure not to touch the zooming/focusing
ring by mistake.
Lens release button
GB
GB
21