Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation
Fitting the Lens
1
12
(GB)
2
1
Rotate and remove the lens mount cap.
2
Screw in the lens (not supplied), and turn it until it is
secured.
Notes
• Clean the optical filter with a commercially available
blower brush to remove dust.
• Use a C-mount lens that has 7mm or less protrusion from
the lens mounted surface.
Installing on a microscope
Use a special adaptor on the lens mount unit. For details,
contact the microscope manufacturer.
Werbung
Kapitel
Inhaltsverzeichnis
