Specifications - Sony DFW-SX900 Bedienungsanleitung

Specifications

Pickup device Progressive scan 1/2type CCD
Effective picture elements:
DFW-SX900 : 1392 × 1040
(horizontal/vertical)
DFW-X700 : 1034 × 779
(horizontal/vertical)
Interface IEEE1394-1995
Output signal format
DFW-SX900 : 1280 × 960
(horizontal/vertical)
DFW-X700 : 1024 × 768
(horizontal/vertical)
Frame rate DFW-SX900 : 7.5/3.75 fps
DFW-X700 : 15/7.5 fps
Transfer speed 400M/200M bps
External trigger signal (conditions)
Pulse width : 10µs or more
Polarity
Amplitude : TTL level
Lens mount C mount
Flange back 17.526 mm
Minimum illumination
20 lx (F1.4, Gain: +18dB)
White balance AWB (automatic adjustment)/ATW
(automatic tracing) or manual
Hue variable
Saturation variable
γ
ON/OFF
: Negative
Gain AGC (Automatic Gain Control),
Manual adjustment (0 ~ +18 dB)
Shutter speed 1 / ~ 2 seconds
20000
Power DC +8V ~ +30V (from IEEE1394
camera cable)
Power consumption
3.3W (DC12V input)
Operating temperature
–5 to +45°C (23 to 113°F)
Storage temperature
–20 to +60°C (–4 to 140°F)
Operating relative humidity
20 to 80% (no condensation)
Storage relative humidity
20 to 95% (no condensation)
Protection against electric shock
Class I
Protection against harmful ingress of water
Ordinary
Degree of safety in the presence of flammable anesthetics or
oxygen
Not suitable for use in the presence of
flammable anesthetics or oxygen
Mode of operation
Continuous
19
(GB)