Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Fill the water reservoir (see: Filling the Water Reservoir) The display will show
Press on the ON/OFF button. The display will show
will be released from the nozzle to remove any remaining residue.
If automatic flushing is finished, the display will show the following message:
You can set the amount of Cappuccino, the temperature, the choice of coffee beans or
ground coffee and the amount of beans/ground coffee by pressing on the menu button
(see Establishing Pre-settings)
Place a coffee cup on the grid directly below the drip nozzle. You can slide the nozzle
upwards and downwards as desired, depending on the height of your cup.
Keep a jug of fresh milk ready next to the appliance. Connect the milk suction pipe to
the milk foam control knob and dip the other end into the milk. Turn the foam control
knob to cappuccino. Always use full-fat milk and store it at a temperature below 8°C.
For Cappuccino you select
Choose the number of cups within 5 seconds, 1 of 2. Standard is 1 cup; you must press
on
for two cups. Your Cappuccino will be made.
Ground Coffee
If you selected ground coffee in the pre-settings the display will show the following:
The icon
will flash to remind you to add ground coffee. With ground coffee added
press on the
icon to make Cappuccino.
LATTE
Coffee Beans
•
Fill the water reservoir (see: Filling the Water Reservoir) The display will show
.
•
Press on the ON/OFF button. The display will show
amount of water will be released from the nozzle to remove any
remaining residue.
If automatic flushing is finished, the display will show the following
message:
illuminated.
You can set the amount of Latte, the temperature, the choice of coffee beans or ground
coffee and the amount of beans/ground coffee by pressing on the menu button (see
Establishing Pre-settings)
The following buttons will also be illuminated.
.
.
The following buttons will also be
.
and a small amount of water
65
DO-429K
and a small
.
Werbung
Inhaltsverzeichnis
