Domo DO-429K Gebrauchsanleitung Seite 59

FLUSHING THE APPLIANCE BEFORE FIRST TIME USE
If using the appliance for the first time or if you have not used it for quite some time
you must flush it.
• Fill the reservoir with a sufficient amount of water (see "Fill water reservoir").
• Place a container on the drip tray grid to catch any wastewater.
• The appliance's display will show
setting.
• Press on the On/Off button
water will be released from the nozzle in order to remove any remaining residue.
• If the automatic flushing is finished, the display will show the
following message:
will also be illuminated.
• Also keep a container with clean water ready. Connect the milk
suction pipe found behind the door on the front right-hand side of
the appliance (see example) to the foam control knob and dip the
other end into the wastewater container.
• Press on the
display will show:
• Press on the
start after warming up first for about 30 seconds.
• After the rinsing/flushing process is finished, you can return to the
original menu using the
FILLING THE COFFEE BEAN HOPPER WITH COFFEE BEANS
• Remove the lid from the coffee bean
hopper.
• Fill the hopper with coffee beans.
• Close the lid carefully.
Do not use ground coffee, double roasted
coffee or freeze-dried coffee in the coffee
bean hopper. This can damage the grinding
mechanism. You can grind your coffee beans
to suit your personal taste by using the coffee grinding knob located in the coffee bean
hopper/container. The finer the grade (-), the stronger the coffee and
the slower the water will pass through the ground coffee.
CAUTION!! Only adjust this dial DURING the grinding process
and do try not to adjust the grinding mechanism when the
grinder is switched off.
FILLING THE APPLIANCE WITH GROUND COFFEE
. The display will show
button, press on the FOLLOWING
button again and the flushing/rinsing process will
.
and it will automatically be set to the default
The following buttons
59
DO-429K
and a small amount of
the