Operation; Connection And Control Devices; Function Explanation - ESAB ESABMig 325 Betriebsanweisung

GB
6

OPERATION

General safety regulations for the handling of the equipment can be found on
page 40. Read through before you start using the equipment!
WARNING – TIPPING RISK!
There is a risk of tipping while transportation and operation, if the welding machine leans
o
more than 10 . In that case appropriate securing has to be provided !
6.1

Connection and control devices

1 Mains supply switch
2 Switch, precise control
3 Switch, coarse control
4 Indicating lamp, power supply ON
5 Orange indicating lamp, overheating
6 Space for digital meters (optional), see
page 141
6.2

Function explanation

6.2.1 Overheating protection
A thermal overload cutout protects against overheating. The cutout resets automatically
when the unit has cooled.
6.2.2 Inductance connection
Higher inductance produces a more flowing weld and fewer spatters. Lower inductance
produces a harsher sound and a stable, concentrated arc.
325e
7 Connection for return cable (–), high induc-
tance
8 Connection for return cable (–), low induc-
tance
9 Connection for welding current cable (+)
10 Connection for control cable for wire feeder
11 MCB
– 46 –