DAB EVOPLUS B 120/220.32 M Installationsanweisung Und Wartung Seite 47

Page 9.0
On page 9.0 it is possible to choose the parameter to be displayed on the Home
Page:
Page 10.0
On page 10.0 you can choose the language in which to display the messages.
Page 11.0
On page 11.0 you can display the alarms log by pressing the right button.
If the system finds any faults it records them permanently in the alarms log (up to a
Alarms Log
maximum of 15 alarms). For each recorded alarm a page composed of 3 parts is
displayed: an alphanumeric code that identifies the type of fault, a symbol that
illustrates the fault in graphic mode, and a message in the language selected on
Page 10.0, giving a brief description of the fault.
By pressing the right button you can scroll through all the pages of the log.
2 questions appear at the end of the log:
On page 12.0 you can set the system status in ON, OFF or controlled by a remote
Page 12.0
signal EXT (digital input IN1).
If ON is selected the pump is always on.
If OFF is selected the pump is always off.
If EXT is selected, reading of the status of digital input IN1 is enabled. When input
IN1 is energised the system goes ON and the pump is started (on the Home Page
the messages "EXT" and "ON" appear alternately at bottom right); when input IN1 is
not energised the system goes OFF and the pump goes off (on the Home Page the
messages "EXT" and "OFF" appear alternately at bottom right).
For the connection of the inputs see par. 8.2.1
ENGLISH
Measured head expressed in metres
Estimated flow rate expressed in m
Rotation speed expressed in revs per minute (rpm)
Head requested by external signal 0-10V or PWM, if active
Power distributed expressed in kW
Operating hours
Liquid temperature measured with the sensor fitted on board
Liquid temperature measured with an external sensor
1. "Reset Alarms?"
Pressing OK (left button) resets any alarms still present in the system.
2. "Delete Alarms Log?"
Pressing OK (left button) deletes the alarms memorised in the log.
42
3
/h