BEFORE INITIAL USE
•
Remove all packaging materials.
•
Fill kettle to the MAX line and bring the water to a boil. When the unit completes the boiling cycle, discard the water - repeat this process 2 to 3 times. This will remove any dust or residue remaining
from the manufacturing process.
BOILING WATER
1.
Remove the unit from base.
2.
Open the cover by pressing the button near the handle (number 2 on the illustration).
3.
Fill the kettle with the desired amount of water. Do not fill above the MAX line.
4.
Close the lid by pressing it down gently until it locks (clicks) into place.
5.
Place the kettle on the base, ensuring that it is correctly engaged.
6.
Connect the powercord to an outlet and switch the unit ON; the power indicator lights up.
7.
The kettle will switch off automatically when the water has come to a boil.
•
After use, unplug and empty unused water. Ensure kettle is switched off before removing from the base. The heating cycle can be stopped at any time by operating the switch.
•
As a safety feature, the unit may not start immediately after shutting off. Please allow 15 to 20 seconds for the kettle to cool down before switching on again.
•
If the kettle ever boils dry, please wait 15 minutes for the unit to cool before refilling with cold water. The safety cut-off will automatically reset during this time.
•
Do not open the lid when in operation. Steam escaping from the spout is hot. This appliance is only suitable for heating water; do not use any other liquids.
•
A minimum of 0.75L of water must be used to prevent overheating.
CLEANING AND MAINTENANCE
CLEANING
•
Unplug the unit and allow it to cool down before cleaning.
•
Wipe the exterior of the kettle with a soft cloth. Do not use abrasive scouring pads or cleaning powders as they may scratch the surface.
•
Due to scale build up, it is best to de-scale your kettle weekly. It is recommended to use Citric Acid for de-scaling. If Citric Acid is not available, you can use the juice of 1 lemon. Fill the kettle halfway with
a mixture of Citric Acid/lemon and water. Allow the unit to boil the solution two to three times. Rinse clean and wipe with a soft cloth.
SPECIFICATION
Model
Power supply
LU-
220-240 V, 50 Hz
217/218/219
WARRANTY DOES NOT APPLY TO CONSUMABLES (FILTERS, CERAMIC AND NON-STICK COATING, RUBBER SEALS, ETC.)
The production date is available in the serial number located on the identification sticker on the gift box and/or on sticker on the device. The serial number consists of 13 characters, the 4th and 5th characters indicate the month, the 6th and 7th indicate the year
of production. The producer may change the complete set, appearance, country of manufacture, warranty and technical characteristics of the model without notice. Please check when purchasing the device.
Power
Capacity
Net weight / Gross weight
1800 W
0,75 kg / 0,89 kg
2,0 L
Production branch:
Package size (L х W х H)
ZHANJIANG AOQI TRADE CO., LTD.
203 ROOM 29 BUILDING NORTH ZONE NO. 26 HAIBIN ROAD
180 mm x 180 mm x 232 mm
ZHANJIANG, GUANGDONG, CHINA.
4
LU-217/218/219