Selecting The Parameters To Edit In The Selected Parts (Ch): Sound; Selecting The Parameters To Edit In The Selected Parts (Ch): Volume - Generalmusic GEM rp-x Bedienungsanleitung

owners manual

SELECTING THE PARAMETERS TO EDIT IN THE SELECTED PARTS (CH): SOUND

Once you have selected the PART you wish to modify
(#01 in this example), the EDIT menu parameter are
selected by pressing the EDIT button. Each time you
press the button a different parameter is selected.
The current default value of the selected parameter, is show
in the display. In the part number 1 the sound is: GRAND
PIANO. Please refer to the sound list included on page 16
of this manual.
Pressing the DATA button you select the next sound
in the sound database.
Modifying any default parameters value, the PERF LED on the
panel start blinking, visualizing the editing status.
Each time you press the DATA button a next sound
is selected.
The rp-x has a database with 50 sounds in total. Please
consult the complete list on Page 16.

SELECTING THE PARAMETERS TO EDIT IN THE SELECTED PARTS (CH): VOLUME

To select the VOLUME parameters of the selected
PART (CH) sound, press the EDIT button once more
time. The current default value of the parameter
is indicated in the display. Volume = 105 in this
example.
You can increase or decrease the volume level, by
pressing the DATA buttons. The display show
you in realtime the value changing.
Once you have reached the VOLUME = 000, (minimum sound
level), by pressing once more again the DATA
the selected part OFF, then the part is disabled.
It's possible to restore the VOLUME default value by pressing the two
DATA buttons at the same time.
Page 8
NOTE
button you'll set
NOTE
Volume -
rp-x
r p - x
r p - x
r p - x
r p - x
r p - x
Volume +
r p - x
Part disabled