Pioneer DJM-900SRT Bedienungsanleitung Seite 23

Category
CH SELECT
MIDI LFO
QUANTIZE
TIME
BEAT EFFECTS
LEVEL/DEPTH
X-PAD
ON/OFF
X-PAD (touch)
When an effect other than [SND/RTN (MIDI
LFO)] is selected at BEAT EFFECT
ON/OFF
X-PAD (touch)
When [SND/RTN (MIDI LFO)] is selected at
BEAT EFFECT
HI
MIC
LOW
NOISE
SPACE
GATE/COMP
SOUND COLOR FX
DUB ECHO
CRUSH
FILTER
Fader Start 1
Fader Start 2
Fader Start
Fader Start 3
Fader Start 4
MIXING
HEADPHONES
LEVEL
Timing Clock
Channel fader 1 or crossfader
Channel fader 2 or crossfader
3
Fader Start operation
Channel fader 3 or crossfader
Channel fader 4 or crossfader
START
MIDI
STOP
1 When turning one button on switches another button from on to off, MIDI on and off messages are sent from the two buttons.
When there is no button that switches off, only the MIDI on message is sent from the button that was pressed.
2 When switched from one position to another position, the MIDI ON and OFF signals are sent respectively from both positions.
— When the [START/STOP] button is pressed for over 1 second, MIDI messages corresponding to the positions of the buttons, faders and controls are sent in a bundle (Snapshot).
The MIDI Snapshot sends all MIDI messages other than MIDI start and MIDI stop.
3 Operation differs depending on the setting of the [CROSS FADER ASSIGN (A, THRU, B)] selector switch.
— When the [CROSS FADER ASSIGN (A, THRU, B)] selector switch is set to [THRU]: MIDI messages are sent when the [FADER START] button is set to [ON] and the channel fader is moved away
from you from the nearest position towards you and when it is moved back to the nearest position towards you.
— When the [CROSS FADER ASSIGN (A, THRU, B)] selector switch is set to [A]: MIDI messages are sent when the [FADER START] button is set to [ON] and the crossfader is moved from the far
edge of the [B] side and when it is moved back to the far edge of the [B] side.
— When the [CROSS FADER ASSIGN (A, THRU, B)] selector switch is set to [B]: MIDI messages are sent when the [FADER START] button is set to [ON] and the crossfader is moved from the far
edge of the [A] side and when it is moved back to the far edge of the [A] side.
Button/Control/Switch
Name Type
Switch
CH1
Switch
CH2
Switch
CH3
Switch
CH4
Switch
MIC
Switch
CF.A
Switch
CF.B
Switch
MASTER
Control
Button
Switch
Switch
Control
Control
Button
Button
Control
Control
Button
Button
Button
Button
Button
Button
Button
Button
Button
Button
Control
Control
—
Button
Button
MIDI assignment Trigger/Toggle
CC 034
2
CC 035
2
CC 036
2
CC 037
2
CC 038
2
CC 039
2
CC 040
2
CC 041
2
CC 118 —
Note 118 Trigger/Toggle
CC 013 —
CC 045 —
CC 091 —
CC 116 —
CC 114
2
CC 064
2
CC 030 —
CC 031 —
CC 085
Trigger/Toggle
CC 105
Trigger/Toggle
CC 106
Trigger/Toggle
CC 107
Trigger/Toggle
CC 086
Trigger/Toggle
CC 087
Trigger/Toggle
CC 088 Trigger/Toggle
CC 089 Trigger/Toggle
CC 090 Trigger/Toggle
CC 093 Trigger/Toggle
CC 027 —
CC 026 —
Timing Clock —
Note 102 —
Note 103 —
Note 104 —
Note 105 —
START —
STOP —
Transmitted data
OFF=0, ON=127
OFF=0, ON=127
OFF=0, ON=127
OFF=0, ON=127
OFF=0, ON=127
OFF=0, ON=127
OFF=0, ON=127
OFF=0, ON=127
0-127
—
—
TIME value (When FLANGER,
PHASER or FILTER is selected, the
value is halved. When a negative
value is selected, it is set to a posi-
tive value.)
0-127
Sends the [X-PAD] position
information.
OFF=0, ON=127
OFF=0, ON=127
0-127
0-127
1
OFF=0, ON=127
1
OFF=0, ON=127
1
OFF=0, ON=127
1
OFF=0, ON=127
1
OFF=0, ON=127
1
OFF=0, ON=127
OFF=0, ON=127
OFF=0, ON=127
OFF=0, ON=127
OFF=0, ON=127
0-127
0-127
—
BACK CUE = 0, PLAY = 127
BACK CUE = 0, PLAY = 127
BACK CUE = 0, PLAY = 127
BACK CUE = 0, PLAY = 127
—
—
En
23