mains.
Do not use any aggressive or abrasive cleaning agents and do
●
not use any solvents.
Do not scratch off stubborn soiling with hard objects.
●
Do not rinse the unit off in water or immerse it into water.
●
UNPACKING
To unpack the unit, proceed as below:
Take the unit out of the carton.
●
Remove all pieces of the packing.
●
Remove any possibly extant labels on the unit (do not remove the rating
●
label).
REQUIREMENTS FOR THE INSTALLATION LOCATION
For safe and flawless operation of the unit, the place of location must meet
these prerequisites:
The unit must be set up on a firm, flat, level and non-slip base that has suf-
●
ficient load bearing capacity.
Make sure the unit cannot fall over.
●
Select the location so that children cannot reach the hot surfaces of the unit
●
and cannot touch the cable.
BEFORE THE FIRST USE
Read these operating instructions thoroughly and keep them handy for referral
later on.
This unit brings water to boil in a few minutes.
To clean the unit, first fill the unit with clear, cold water and then boil it.
●
Subsequently pour away the water because of hygenical reasons.
DE
EN
FR
NL
PYC
15