Daily Use - Zanussi ZDI11002 Benutzerinformation

5
Filling the rinse aid dispenser
Caution! Only use rinse aid for dishwashers. Other
products can cause damage to the appliance.
The rinse aid, during the last rinsing phase, helps to
dry the dishes without streaks and stains.
1

Daily use

1. Open the water tap.
2. Turn the programme knob until the programme mark-
er is aligned with the programme you want to set.
Make sure that the appliance is in setting mode. Refer
to 'SETTING AND STARTING A PROGRAMME'. Set
the correct programme for the type of load and the
degree of soil.
• If the salt indicator is on, fill the salt container.
• If the rinse aid indicator is on, fill the rinse aid dis-
penser.
3. Load the baskets.
4. Add the detergent.
5. Start the programme.
Loading the baskets
Refer to the supplied leaflet with examples of the
load of the baskets.
6
2
max
3
max
Fill the rinse aid dispenser
when the lens (A) is clear.
• Only use the appliance to wash items that are dish-
washer-safe.
• Do not put in the appliance items made of wood, horn,
aluminium, pewter and copper.
• Do not put in the appliance items that can absorb water
(sponges, household cloths).
• Remove remaining food from the items.
• Make soft the remaining burned food on the items.
• Put hollow items (cups, glasses and pans) with the
opening down.
• Make sure that cutlery and dishes do not bond togeth-
er. Mix spoons with other cutlery.
• Make sure that glasses do not touch other glasses.
• Put small items in the cutlery basket.
• Put light items in the upper basket. Make sure that the
items do not move.
4
A
To adjust the released
quantity of rinse aid, turn
the selector between posi-
tion 1 (lowest quantity)
and position 4 (highest
quantity).
19