Herunterladen Inhalt Inhalt Diese Seite drucken

Specifications - Nikon Nikkor ED 300mm f/2.8 IF Gebrauchsanweisung

Vorschau ausblenden Andere Handbücher für Nikkor ED 300mm f/2.8 IF:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

SPECIFICATIONS
Focal length: 300mm
Maximum aperture: f/2.8
Lens construction: 8 elements in 6 groups (plus dustproof glass plate built into front)
Picture angle: 8" 10'
Distance scale: Graduated in meters and feet from 3m (10 ft) to infinity (•»)
Aperture scale: f/2.8 ~ f/22 on both standard and aperture-direct-readout scales
Diaphragm: Fully automatic
Exposure measurement: Via full-aperture method; meter coupling ridge provided for
AI cameras and meter coupling shoe for non-AI cameras
Focusing: Nikon Internal Focusing (IF) system
Infrared focusing index: Provided
Tripod mounting: Built-in tripod mounting collar rotatable through 360°
Lens hood: Built-in Telescopic screw-out type
Extension lens hood: Provided
Filters: Slip-in type glass filter holder accepts 39mm dia. screw-in filters; gelatine filter
holder accepts gelatine filters
Mount: Nikon bayonet mount
Dimensions: Approx. 132mm dia. x 255mm extension from flange; approx. 263mm
long (overall)
Weight: Approx. 2400g
Accessories
Slip-on leatherette front lens cap
Rear lens cap LF-1
Extension lens hood HE-4
Built-in 39mm screw-in filter L37C
Gelatine slip-in filter holder
Heavy-duty case CT-302
39mm screw-in filters
Teleconverter TC-14A
Teleconverter TC-14B
Teleconverter TC-201
Teleconverter TC-301
LENS CARE
• Although you should always keep the lens surfaces clean, rough cleaning must be
avoided. Wipe with a soft, clean cotton cloth moistened with alcohol tq remove
grease or fingerprints from the lens surfaces.
If you use ether in cleaning the lens, a smudge sometimes appears on the surface of a
multi-coated lens. If this happens, wipe it again with a cotton cloth moistened with
alcohol.
• Take care in cleaning the rear part of the lens with a spray-gun type blower, because
its strong stream of air may damage the lens diaphragm blades. To avoid damage,
set the lens at full aperture and use the blower far enough away.
• Always protect the lens surface from dirt or damage. The lens hood also helps tq pro-
tect the lens.
• Keep the lens cap in place whenever the lens is not in use.
14

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis