In-1 Hedge Trimmer / Pole Pruner Phshe 900 B2; Introduction; Intended Use Of The Long-Handled Hedge Trimmer; Intended Use Of The Pole Pruner - Parkside PHSHE 900 B2 Originalbetriebsanleitung

2-IN-1 HEDGE TRIMMER /
POLE PRUNER PHSHE 900 B2

Introduction

Congratulations on the purchase of your new appliance. You have chosen
a high-quality product. The operating instructions are part of this product.
They contain important information about safety, usage and disposal.
Before using the product, please familiarise yourself with all operating and
safety instructions. Use the product only as described and for the range of
applications specified. Please also pass these operating instructions on to
any future owner.

Intended use of the long-handled hedge trimmer

This appliance is intended for the cutting and trimming of hedges, bushes
and flowering shrubs in the home environment. This is a hand-held appliance
with an integrated motor unit with linear reciprocating cutting blades.
WARNING!
► Hedge trimmers are not suitable for use by children.

Intended use of the pole pruner

This appliance is intended for trimming branches in trees.

Intended use

Use this product only as described and for the areas of applications spe-
cified. The appliance is not intended for commercial use. The appliance is
designed for use by adults. This appliance is not intended for use by anyone
(including children) with reduced physical, sensory or mental capabilities or
lack of experience and/or knowledge. The use of the appliance in rain or in
humid environments is prohibited.
Any other usage or modification of the appliance is deemed to be im-
proper and carries a significant risk of accidents. The manufacturer accepts
no responsibility for damage(s) attributable to misuse.
■ 16 │ GB │ IE

Features

Motor unit
Tommy screw
Nut
Boom
Screw
Round handle
Carrying lug
Turning element
Release button
Safety lock-out
On/Off switch
Power cable
Strain relief
Hedge trimmer attachment
Cutter bar
Gear housing
Lock/release
Base plate (hedge trimmer)
Control lever
Handle
Front boom
Locking pin
Drive shaft
Protective cap
Pole pruner attachment
Bench grinder support
Saw chain
Blade
Stop
Oil tank
Nut
Thread
Sprocket cover
Blade hole
Blade guide
Guide rail
Oil dispenser
Chain adjuster screw
Chain sprocket
Chain roll pin
Front boom
Drive shaft
Protective cap
Locking pin
Safety ring
Control lever
Base plate (pole pruner)
Lock/release
Oil filler cap
PHSHE 900 B2