Cutting Performance (Area) - Ransomes FAIRWAY 250 Benutzerhandbuch

The cuts per metre (cuts per yard) are dependant upon the forward speed of the machine. The figures quoted
in the cutting ratio charts are given with the variable cylinder speed set at 1300rpm.
1.7 hectares/hr. at 9 km/hr. (4.2 acres/hr. at 5.6 mph)
Allowance is included for normal overlaps and turning at the end of each cut.
GB GB GB
GB GB
CUTTING PERFORMANCE CUTTING PERFORMANCE CUTTING PERFORMANCE
CUTTING PERFORMANCE CUTTING PERFORMANCE
CUTTING RATIO (METRIC) CUTTING RATIO (METRIC) CUTTING RATIO (METRIC) CUTTING RATIO (METRIC) CUTTING RATIO (METRIC)
Forward cuts per metre
speeds
km/hr 7-Knife
8 84
11 61
CUTTING RATIO (IMPERIAL) CUTTING RATIO (IMPERIAL)
CUTTING RATIO (IMPERIAL) CUTTING RATIO (IMPERIAL) CUTTING RATIO (IMPERIAL)
Forward cuts per yard
speeds
m.p.h. 7-Knife
5 77
7 55
CUTTING RATIO (INCH CLIP) CUTTING RATIO (INCH CLIP) CUTTING RATIO (INCH CLIP) CUTTING RATIO (INCH CLIP) CUTTING RATIO (INCH CLIP)
Forward inch clip
speeds
m.p.h. 7-Knife
5 0.47
7 0.65

CUTTING PERFORMANCE (AREA)

CUTTING PERFORMANCE (AREA)
CUTTING PERFORMANCE (AREA) CUTTING PERFORMANCE (AREA) CUTTING PERFORMANCE (AREA)
11-Knife
131
94
11-Knife
120
85
11-Knife
0.30
0.42
37