Troubleshooting - NUK BP7 Bedienungsanleitung

10520xxx_Rev400_GA_NUK Mipu Tischpumpe BP7.book Seite 35 Donnerstag, 5. April 2018 12:52 12
1. To achieve the
temperature of approx. 37 °C, put the
container of defrosted breast milk in the
baby food warmer.
The container must be open to
Caution!
prevent pressure build-up as the milk
warms up.
2. Shake the milk gently before feeding so
that milk and milk fat are properly mixed
again.
3. If you express breast milk more than
once within a period of 24 hours, the
Problem
Pump does not No power supply
work
Lip valve missing, incorrectly
positioned or damaged
Breast milk container is full and
lip valve is already contacting
the expressed milk
No suction or suction level too
low
Filter is wet
correct drinking
Notes:
• Consult your health visitor, midwife,
• You can find more information about

12 Troubleshooting

Reason
35
freshly expressed milk may be added to
the previously cooled breast milk.
However freshly expressed milk must be
cooled down before being added to milk
that is already cool. The temperatures
must be the same (cold on cold).
doctor or pharmacist
information about long-term storage.
breastfeeding on our NUK
(www.nuk.com).
Remedy
Battery operation: Check that the battery
is adequately charged (see "7.3 Battery
operation (Nature Sense model only)" on
page 30).
For mains operation: check that the mains
plug and mains adapter are correctly
inserted
External power bank: Check that the
power bank is adequately charged.
Check that the lip valve is correctly
positioned
If it is damaged, use the replacement lip
valve supplied
Replace breast milk container
Check that the lip valve is correctly fitted.
Make sure that the breast shield forms a
complete seal around your breast.
Remove filter and allow more time to dry
or use dry replacement filter (see
"5.3 Special cleaning of tube and filter"
on page 29).
for detailed
website