Transportation, Storage And Disposal; Technical Data; Contents Of The Ec Declaration Of Conformity - McCulloch MTO002 Bedienungsanweisung

battery. Ensure the attachment has stopped
completely before you start to work on it.
1. Loosen the split pin. (Fig. 31)
2. Remove the cutter package from the gear housing's
output axle. (Fig. 32)
3. Mount the cutter package onto the gear housing's
output shaft. (Fig. 33)
To do daily maintenance on the product
(Fig. 34)
1. Make sure the blade guard is not damaged and does
not have cracks. Always replace a damaged cutting
attachment.
Transport and storage
If transporting the attachment on another vehicle always
use approved securing devices and make sure that the
attachment is securely held.
MTO002
Weight, kg
Blade length, mm
Center hole, blade, mm
Weight, 4x cutters, kg
Speed, blade, rpm
Sound power level, guaranteed (L

Contents of the EC declaration of conformity

We, Husqvarna AB, SE 561 82 Huskvarna, SWEDEN,
declare under our sole responsibility that the
represented product:
Description
Brand
Platform / Type / Model
Batch
complies fully with the following EU directives and
regulations:
10

Transportation, storage and disposal

Technical data

), dB(A)
WA
Cultivator attachment
McCulloch
Platform UCUA, repre-
senting model MTO002.
Serial number dating 2018
and onwards.
2. Make sure that the blades do not move when the
throttle/power trigger is released.
3. Make sure that the blades are not damaged and
show no signs of cracks or other damage. Replace
the blades if necessary.
4. Make sure that nuts and screws are tight.
5. Clean the external side of the product.
6. Check that the split pins and cotter pins are not
damaged and attached correctly.
Ensure the attachment is cleaned and that a complete
service is carried out before long-term storage.
Directive/Regulation
2006/42/EC
2000/14/EC
2011/65/EU
Harmonized standards and/or technical specifications
applied are as follows: EN ISO 12100, EN 709+A4
In accordance with directive 2000/14/EC, Annex V, the
declared sound values are stated in the technical data
2.9
245
19
3.7
175
104
Description
"relating to machinery"
"relating to outdoor noise"
"restriction of use of cer-
tain hazardous substan-
ces"
1037 - 001 - 21.02.2019